BearExxa MK3(S) LM8LUU Z-axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a really minor modification, but this is untested.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 1991
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Disclaimer: it's a really minor modification, but this is untested. I haven't put this to use myself (I went straight to a 10mm Z-axis in my upgrade/mod-endeavors).
Instead of using two LM8UU bearings in the X-ends, the X-ends have been changed to make use of a single LM8LUU/LMUW8.
It's a more cost-effective solution. A single Misumi LMUW8 costs less then two LMU8's. Aside from that, in theory there is both some mechanical benefits and drawbacks. But the either are probably negligible, especially if using Misumi bearings & PSFU-rods.
If this helps you out, please like, rate and/or share a picture of the result! 🙂
Credits
It's an adaptation of the BearExxa created by Grégoire Saunier. Created using the 1.0.0 source files.