Lelit Elizabeth Steam Knob Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a knob cover designed to make your Lelit Elizabeth steam knob more substantial.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 149
- Wydruki
- 2
- Wyświetlenia
- 1451
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a knob cover designed to make your Lelit Elizabeth steam knob more substantial.
The design is inspired by the Lelit Bianca knob.
The cover is inserted from the back of the original knob and secured with a threaded cap to prevent detachment.
Installation instructions:
1. Print the knob and cap. 0.16 layer height or lower is recommended for smooth curvature at the front of the knob.
2. Remove the original knob by carefully pulling it from the machine (you may need to wiggle it slightly), insert the knob cover from the back, and secure it with the threaded cap.
3. Reattach the knob to the machine.
Important: Ensure that you align the flat part of the shaft with the corresponding flat part of the hole on the knob (see picture).
4. Enjoy using the new knob.
You can download the Fusion360 and step file with the original knob model inside to remix or create your own knob if desired.
I printed it with PETG, and I've been using it for a week now, so far so good, no warping or loose problem.
Happy steaming.
PS. Yeah I know that bright red color was not an elegant choice, I don't have other PETG color at the moment. Planning to print it in black soon.