HW-613 support bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small support bracket for the generic HW-613 mini-to-mini step down modules.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a small support bracket for the generic HW-613 mini-to-mini step down modules you can find on aliexpress and many other suppliers.
It has a small angled corner in the top for the pin 1 notation, which in this case is the enable pin. On the inside there is a small indent so you can also fix the output voltages. It has a tight fit, so glue isn't necessary to fix the PCB in place.
The photo's show a example, which is printed in Prusa Galaxy Silver PLA.
Specifications:
Used filament in (g): 1.03
Used filament in (m): 0.34
Size (L x W x H): 22.4 x 13 x 4.2 mm
Printed on: MK3s+