Snap-Fit Raspberry Pi 3 Model B+ Case for Prusa Mini and Mk3S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @karelv's case mount to work with a Raspi 3 B+
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 539
- Wydruki
- 7
- Wyświetlenia
- 3811
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked @karelv's case mount but a) it doesn't work for a Raspi 3 B+ and b) I wanted the USB cable to go out toward the back. So I took its rail mount system and attached it to @Malolo's base, using the slit design version. The only downside is that the raspi camera slot is on the bottom now. I don't use it, so I don't really care :-), but it looks like there's enough clearance for it anyway.
Print instructions
Printed with Prusament Orange PETG, 0.2mm layer height, 10% infill. I put a support enforcer under the hooks.
With its closeness to the heated print bed, I would go with PETG or ASA.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.