Universal Cutlery&Plates Drainer (upgraded)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of a Universal Drainer for cutlery and plates, with a wide contact surface and rounded edges.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 210
- Wydruki
- 2
- Wyświetlenia
- 723
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Rotate the model by 60° to make it fit on the buildplate. I recommend more than 3 outline Perimeters to prevent the teeth from breaking. Post-Processing, before using it in the kitchen!!
I combined two drainer designs, which I was happily using for the last few years. I combined them to one Model and increased the contact surface to prevent the Plates from tipping over. I added crossbars in the cutlery drainer, to stop knifes from sliding through. Holes in the bottom to let the Water out.
Have fun :D