Charlie Brown - MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MMU version of Charlie Brown, from the comic strip Peanuts by Charles Schulz.
- Ocena
- 4,667 / 5
- Polubienia
- 207
- Pobrania
- 1038
- Wydruki
- 9
- Wyświetlenia
- 3438
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MMU version of Charlie Brown, from the comic strip Peanuts by Charles Schulz.
Personality-wise, he is gentle, insecure, and lovable. Charlie Brown possesses significant determination and hope, but frequently fails because of his insecurities, outside interference, or plain bad luck.
The model, as presented is 71mm tall.
This MMU model was derived from my non-MMU model (reworked for a clean MMU print):
https://www.prusaprinters.org/prints/233-charlie-brown
Enjoy! And don't forget to post your makes.
Print Settings
Printer Brand: Prusa
Printer: MMU2s
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2mm
Infill: 20%
Filament: various pla various
Notes:
Instructions
The 3MF file contains all the parameters I used for the Prusa Slicer.
I've also included all the STL files in case you use a different slicer.
The supplied files are for the smallest recommended size of the model. The model can be sized up without issue, but I would not recommend sizing it down any further.