1 / 1
Plant and Animal Cell Models (MMU2S compatible) — zdjęcie 1

Plant and Animal Cell Models (MMU2S compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

these are remixes of https://www.thingiverse.com/thing:2485063 and https://www.thingiverse.com/thing:2811554 There…

Ocena
5 / 5
Polubienia
652
Pobrania
2163
Wydruki
11
Wyświetlenia
14 161
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

these are remixes of https://www.thingiverse.com/thing:2485063 and https://www.thingiverse.com/thing:2811554

There were a ton of problems with the original models and they weren't compatible with printers unless they were configured with the palette multi material system. I remixed them to work with the MMU2S and have all the parts pre-set to the correct colors.

Print instructions

The plant cell does require some manual color swaps which are pre-set to stop the print in the .amf file

The animal cell has ~20 errors that netfabb was unable to fix but from what I can tell they are in the infill part of the model so it doesn't actually affect the print.

For both models, I strongly suggest increasing the amount of filament wiped between color changes to prevent color bleed. My first few attempts at these prints wound up with some odd color combos to put it mildly. Apparently skin pink, pale green, and fire engine red produce a very dull greenish yellow.

Tagi