TaoTao Pony Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My moped didn't come with one, so here's one for you. It will fit the complex curve if you use a heat gun to bow it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Battery Cover for the 2018 TaoTao Pony Scooter with the GY6 engine. Pretty sure this will fit most of the generic chinese scooters of similar years/makes. I included the STEP file so that you can modify it for your application if you want to remix it and make it different.
The picture has a hole at the front, but I have removed that from the model. I printed mine in ASA with 40% infill, and used a heat gun after to help it fit the complex curve of the scooter.
Recommended that you use less infill, as it's not really necessary. PETG would likely work very well for this print, but I had ASA/ABS on hand.