Bird Perch With Poop Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple bird perch that will hold a small to medium bird and has a place for them to poop.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 1086
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple bird perch that will hold a small to medium bird and has a place for them to poop.
note that the photos from this model are photos of a slightly older model than the ones included
What to print:
Print all 3 .stl models, enable supports touching build plate for the poop tray but make sure to position it in a way that requires the least supports.
Assembly
Once printed slot the small tapered end of the poop tray into the rectangular opening at the bottom of the base, the flat side should be face up. Get a small stick or dowel that will fit into the 14 mm attachment point for the perch, glue in the stick or dowel and confirm it is snug then screw the threaded end into the thread at the top of the base. Make sure that the dowel or stick doesn't overhang the poop tray. You can then attach the perch to anywhere using any method with the 10 mm holes at each end of the base. In the photo I used 2 3d printed clips that clamp to the molding of my window and have an attachment point that fits into the mounting point holes on the base of the perch.
Filament
I printed this with Inland white PLA but any color or type will work, obviously don't use flexible filament.