Wago wall connection, junction holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added safety when leaving an Wago connector exposed. Can be mounted with 2 screws and 2 small cable ties.
- Ocena
- 4,8 / 5
- Polubienia
- 134
- Pobrania
- 444
- Wydruki
- 3
- Wyświetlenia
- 2935
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added safety when leaving an Wago connector exposed. Can be mounted with 2 screws and 2 small cable ties.
Use the cable strain relief points to reduce the risk of damaging the wires.
Not suited for outdoor use, only use if you know how to work with electronics.
Let me know if you have any other suggestions and I see what I can do.
Some people have asked me for a Paypal donation link: paypal.me/jahtimojah
Print instructions
Can be printed without support in the orientation showed in the pictures. The inside might need some cleanup, this is not visible.
No supports needed.
20% infill (anything higher works too)
0.24 mm (any should work)