Plant support hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on hook to support plants. Clips on to a 6 mm vertical wooden stick.
- Ocena
- 4,5 / 5
- Polubienia
- 48
- Pobrania
- 178
- Wydruki
- 4
- Wyświetlenia
- 1043
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Many plants need some support, not to fall. This hook is designed as a flexible way of stabilizing the stems of plants in big pots. Put a 6 mm wooden stick/rod in the middle the flower pot; then attach as many hooks as needed to embrace the stems.
The model is parameterized so, if necessary, you can change the size and the diameter of the wooden stick by changing the parameters at the top of the .scad file.
Print as many as you need. Preferably, use PETG since it is stronger and flexes more easily than PLA. You can normally print several on the same plate.