Eibos Vacuum Bag Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple model to adapt Eibos Vacuum Bags to an inexpensive vacuum sealer
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the Eibos Filament Vacuum Bags but I felt like their vacuum was overpriced, plus I already had an inexpensive no-name model from Amazon. I created this simple adapter to fit over the vacuum port on the Eibos bags and also inside the vacuum port on the handheld vacuum. I cut some strips of adhesive-backed foam weather stripping tape and adhered it to the bottom of this model for a better air-tight seal on the vacuum bags as well.
This can be printed with no supports, 2-4 walls, and any infill percentage. I personally printed it out of PLA but any material should work fine.