1 / 3
Tesla Model Y HomeLink Bracket Garage Door Opener — zdjęcie 1
1 / 3

Tesla Model Y HomeLink Bracket Garage Door Opener

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bracket for HomeLink garage door opener module on Tesla Model Y

Ocena
0 / 5
Polubienia
10
Pobrania
197
Wydruki
0
Wyświetlenia
1671
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Bracket to retrofit a HomeLink garage door opener into a 2023 Tesla Model Y. Remixed rhovey's bracket with the following changes:
1) Changed mounting position to more closely align with the actual Tesla bracket (from pmlody’s design https://www.printables.com/model/382187-tesla-3-homelink-bracket)


2) Reduced much of the bulk from original design to reduce signal interference

3) Tuned up a few of the joints to add stability

4) Added holes to accommodate a zip tie to help secure the module into the bracket (don't over-tighten the zip tie!)

Reference this video for the step-by-step process (module part number and bolt size included in the video description).
https://youtu.be/6_5_g_Wc75A
Installation and configuration took me only about 20 min total, and did NOT require a Tesla technician. YMMV.

Print settings:
Supports enabled
55% infill
PETG filament to increase durability and heat tolerance
.20 resolution

Tagi