HereLink Antenna Mount for Hexsoon EDU-450
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15 degree HereLink Antenna mounts for the Hexsoon EDU-450 Multicopter Frame. STEP files provided.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
These antenna mounts are designed to mount the HereLink antenna's to a Hexsoon EDU-450 multicopter frame. They are patterned to match two of three holes set on the left and right sides of the lower plate. The mounts are angled to provide a 15 degree angle to the antenna as per the directions provided by Cube Pilot for installation. This latest version of the mount includes a post intended to provide a mounting location for a Benewake TF-Luna LIDAR module as well.
These mounts do not extend the entire length of the antenna as it seemed unnecessary and saves a tiny amount of weight. I simply sliced the double sided tape that came on the antenna at the bottom of the mount and used half of it (see pictures). I've since edited this design several times and have just kept replacing that top part of the tape. I also provide a spot for a small zip tie at the top to help secure the coax.