1 / 13
Terminal for SSD1306 0.96" OLED and Wemos D1 Mini
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for SSD1306 0.96" OLED display and a Wemos D1 Mini. Suitable for Software like OctoPrint Monitor.
- Ocena
- 5 / 5
- Polubienia
- 151
- Pobrania
- 1136
- Wydruki
- 15
- Wyświetlenia
- 5303
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 15) (Komentarze: 20)Remiksy (1)Kolekcje (164)Powiązane
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;)
Changes:
-rounded the houding edges for a smoother look
-create a bezel for a 0.96" OLED
-make the bezel rotatable for “Tate Mode”
-center the cord hole to the middle
-move the Wemos holder to center the USB port
-change some sizes for better fitting
-round some edges
-modified the housing to hold the Wemos base