Hulk NOT Smash, Hulk Clamp , Fun Multipurpose clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun quick clamp, which even at 50% scale can still work well.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Just a bit of fun but still works.
I designed a very simple clamp and added the hands of Hulk to help keep items in place.
You can however if you want to, use the Hulk Hands to SMASH anything you like.
Obviously with any fully 3D Printed clamp, tolerances can be tight. You may need to play with the two screws to make them work.
The Clamp in the photos is printed at 50% and it turned out well first time.
I printed the Hulk Hands at 15% Infill with no supports.
Both the screws were printed with raft and supports at 65% Infill and on a 15 degree angle with the handle nearest the base.
You will need to see what works best for your printer.
A quick fun print.