1 / 1
Prusa XL X-Carriage cover with access to Nextruder nozzle grub screw — zdjęcie 1

Prusa XL X-Carriage cover with access to Nextruder nozzle grub screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No need to take the X carriage cover off to swap nozzles!

Ocena
5 / 5
Polubienia
28
Pobrania
156
Wydruki
3
Wyświetlenia
1452
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Step 7 in the XL Prusa nozzle swap procedure https://help.prusa3d.com/guide/how-to-replace-the-prusa-nozzle-xl_405846 is plain stupid. A simple hole in the x-carriage-cover part allows loosening the grub screw of the extruder that holds the nozzle in place without removing the cover. This remix is similar to https://www.printables.com/model/495677 but I added the Original Prusa XL logo. FWIW, I'm pretty sure the font is Helvetica Neue, at least to my eyes it looks identical to what Prusa is using.

Two 3MF files attached, one for the Mk3S and one for the XL. I didn't test the XL version myself. I used the Mk3S because filament swaps are a lot faster than on the XL.

Prints without an MMU. Printer will prompt for filament swaps. If using the attached 3MF, the order of filament swaps is Gray→White→Orange→Black→Gray→White→Orange→Gray→White→Black

(And yes, it's red, not orange, in the photo. My printers are named after colors, the is the XL Red).

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.