1 / 6
SUPER MARIO GOAL POLE - 5 FLAGS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey Super Mario Bros. fans! You can now raise and lower your very own flag with the Super Mario goal pole.
- Ocena
- 5 / 5
- Polubienia
- 225
- Pobrania
- 584
- Wydruki
- 6
- Wyświetlenia
- 3180
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (20)Wydruki i komentarze (Wydruki: 6) (Komentarze: 8)Remiksy (0)Kolekcje (267)Powiązane
Raise your own Mario flag, or one of the other four flags, with this mechanical model. Twist the gear in the back to raise and lower the flag. There are five interchangeable flags:
- Mario flag
- Luigi flag
- Bowser flag
- Toad flag
- Toadette flag
Model size: 17.8 cm x 9 cm
THANK YOU to my followers on social media! Follow me @SaraPrints3D to see the latest models as they drop:
TikTok | Instagram | YouTube | Twitter | Facebook
Printer Settings
Follow these recommended settings:
- Nozzle: 0.40 mm
- Layers: 0.16 mm layers for flags and gears. 0.20 mm for the rest is okay
- Infill: 25% gyroid infill.
- Walls/Perimeters: 3
- Wall/Perimeter Generator: Classic
- Supports: Small amount required under the flagpole gear and under the opening in the tower that the large gear fits through. I used default support settings.
- Speed: 60 mm/s for the sheath, flagpole, and flag attachment nut. Default printer speed for the other parts.
- For MMU/AMS compatible flags, split into parts for easy colorizing. If you have a Bambu printer, this has already been done for you in the 3MF file.
- For printers without a MMU, you can use the embossed flags and set a color change to white for the last 0.40 mm.