Olympia XL Cart Frame Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A block that allows you to attach up to 4 1/4"-20 nuts or bolts to an XL cart leg.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a block that allows you to attach up to 4 ¼"-20 nuts or bolts to attach accessories to your Olympia XL Cart.
*Warning: You must remove the handles of the cart to slip these on, and that isn't easy. The metal tube is peened over, and you must grind part of it off. I included a picture for reference.
**Warning: This is designed with machine screw nuts in mind, which are 3/16" thick. A standard hex nut is 7/32" thick and will not work.
3/8" ¼-20 bolts work great for both attaching things and used as a set screw to lock the block in place.
Printer Settings:
Layer Height: .2
Infill: 50%
Wall Thickness: 2mm (This is important for strength)
Supports: yes