HR Giger Birthmachine - 15-30cm PrintInPlace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a PrintInPlace way smaller modification of this model: https://www.prusaprinters.org/de/prints/49007-birth-…
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 584
- Wydruki
- 7
- Wyświetlenia
- 3726
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a PrintInPlace way smaller modification of this model:
https://www.prusaprinters.org/de/prints/49007-birth-machine-hr-giger
Thx for sharing this in the first place to the David Warboss.
I just wanted so have this in one piece in postcard format.
Print instructions
Don't use "thin wall detection" in slicer, else you will have strange details on the gun of the kid. The images show the "thin wall detection" model. It looks way better in the 2nd version i uploaded here. But this was a gift and i send it alrdy, so no images from the actual pretty version.
Print it on 0.1mm for nice childfaces.
And maybe use a 0.2mm nozzle.
I splitted it on 1.8mm so that i got a black background and a grey image.