1 / 19
Small Y Belt Tensioner for Tevo Tarantula
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
y belt tensioner
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24
The original version was too big for my usage. So I created this smaller version of Y belt tensioner for Tevo Tarantula.
Changes:
- Turnwheel has the grave for a nut
- backplate is screwed to brackets using M3 flat head screws
- Tensioner module, brackets and backplate are smaller -> So it's shorter for 30mm than the original tensioner from Banholm.
- it's compatible with large bed
Screws:
- 2x Pulley screw and nut
- 2x Pulleys
- 4x M3x12mm Flat Head Screw (for the backplate)
- 2x M3x10mm Flat Head Screw (for the middle holes in the backplate)
- 6x M4x10 screws
- 6x M4 T-nuts
- 1x M4x30mm screw
- 1x M4 Nut
- 1x Washer
3D Assembly: https://a360.co/336NzIu
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Category: 3D Printer Parts
