1 / 20
Central Metal Differential Housing (for Truggy by Niko)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
central metal differential housing
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24
This is central differential housing for metal differential for OpenRC Truggy 1/10 by NiKO.
All files has to be printed!
You will need:
- 1x 33154 central metal differential
- 1x dogbone shaft - 89,5 mm
- 1x dogbone shaft - 84 mm
- some M3 screws (12mm should be long enough)
I suggest you to use PETG or ABS, because motor can get hot.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
70%
Category: R/C Vehicles
