Jedi Holocron Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You are a Jedi Master! Print this Holocron to learn about the ancient teachings of the Jedi Order and the Force!
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 1168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
You are a Jedi Master!
Print this Holocron to learn about the ancient teachings of the Jedi Order and the Force!
It also works as a great pencil holder to organize your desk!
May the force be with you!
Print instructions
DO OR DO NOT. THERE IS NO TRY.
Printing
Print at FINE settings
I printed mine at 0.15 layer height.
Use 20% infill and print at 40 mm/s
I printed mine at 50 mm/s, although I think slower is better for this print.
Print in any filament type.
I printed mine using white PLA.
Painting
For painting, I lightly sanded all of the faces. Then I painted the blue sections first, wiping down any excess paint with a wet cloth. Then I proceeded to paint the golden parts. After drying, I sprayed the print with a clear coat of spray lacquer to prevent the paint from coming off.
You could go ahead and print with either a blue or golden filament and paint the sections with the color you didn't print with.
This Holocron is 50 mm x 50 mm x 50 mm.
You could go ahead and scale it to obtain a bigger Holocron that could be used as a planter or whatever you want it to be.