Protective Case for TP4056
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case to protect the TP4056 charging circuit, quick print and custom-fit protection for USB-C
- Ocena
- 4,833 / 5
- Polubienia
- 124
- Pobrania
- 1395
- Wydruki
- 12
- Wyświetlenia
- 3449
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design.
With this circuit things can get quite hot so i designed it to have a air barrier so its not directly touching the plastic.
I would recommend printing with some heat resistant plastic and avoid PLA for this one.
Its designed for usb-c but usb micro should fit as well.
Print settings:
Layer height: 0.16mm
Infill: 15%
No supports needed.