Noctua Quiet Soldering Fume Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes you need a quiet fume extractor!
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 241
- Wydruki
- 2
- Wyświetlenia
- 2663
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Want one printed get it here: https://www.laserbear.net/products/noctua-soldering-fume-extractor-duct
This extractor is designed to increase the static pressure of the airflow to pull air from further than the fan by itself.
We choose the Noctua NF-A12x25 5v fan in order to leverage its USB functionality. Technically any 120mm x 25mm fan will work, but you can't beat a fan this quiet.
With this fan we are able to extract from ~4" (120mm) from the opening through a carbon filter.
You can use the filter as a cutting template for the carbon filter material.
You will need:
Noctua NF-A12x25 5v
4x M3 heat set inserts
4x M3x30mm Screws
1/8"(3mm) Carbon FIlter Sheets
Filament Used In our picture:
Ziro Matte Pla Chocolate