Silica Drying Tray for Eibos Easdry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Breathable, stackable trays, and stand, for drying silica in Eibos Easdry.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 126
- Wydruki
- 6
- Wyświetlenia
- 904
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple little stackable trays for drying silica in the Eibos Easdry. I recommend using the stand as the bottom layer, to allow for airflow.
Printed in PETG and stood up well, even on the highest setting. No supports needed.
To create the mesh bottom in PrusaSlicer:
- Ensure you are in Advanced or Expert Mode
- Right click the object in the right hand list
- Select both Infill and Layers and Perimeters
- In the Infill Menu, which appears bellow, set fill density to around 30% and Fill Pattern to Rectilinear (you can play around with this but these are the settings which work well with my silica which are 3-5mm)
-In the Layers and Perimeters Menu set both Bottom solid layers and Top solid layers to 0