1 / 3
Fuel additive funnel with snap on caps
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fuel filler neck funnel with caps
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I was sick of my funnel always being dirty when adding additive to my RAM pickup, so I designed and printed this one out of PETG. Sure, I could have bought one for a few bucks, but what is the fun in that. It works well with my truck, is long enough and the correct size to open both filler neck doors and allow the additive to go into the tank. Time will tell if the PETG will hold up, I think it will, but I was sure PLA would not. It should work for other pickups as well with the large tank filler opening.