Method Wheels 703 hub extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension for the Method 703 hub cap to make room for the extended hubs on LandCruiser and Lexus LX SUVs
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 964
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
The LandCruiser and Lexus LX have a front hub that extends further out than the Method 703 wheels. This extension mounts to the wheels, then allows the Method hub cap to mount to the outside.
NOTE: I just added a second set of files that are the complete cap for both front and rear. Use these if you don't want to run the method-branded caps. They also create a good base for printing on with the eufymake E1.
I recommend printing with PETG because of its toughness, impact resistance, UV resistance, chemical resistance, and water resistance.
Four tips:
1) Run them without the method caps for a week to make sure they stay on
2) Silicone the method caps to these extensions. A small dab in each hole is perfect.
3) Don't use the wire ring that comes with the hub caps. It doesn't fit over the hub nuts.
4) Make VERY sure you align the extension tabs so they don't hit the hub nuts. If you try to push it on with the tabs over the nuts, the tabs will just break off.
More details on the build here: https://forum.ih8mud.com/threads/build-moxie-2007-lx470-limited.1299716/post-14799901