Rounded Flexible Kerf Pattern for Laser Cutting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a flexible pattern for laser cutting that enables a piece of wood to be fully rounded for living joints.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 348
- Wydruki
- 0
- Wyświetlenia
- 1538
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
As the model name suggests, this is my first attempt at a pattern to make fully rounded corners on wooden objects. The design cuts well, and looks aesthetically pleasing, and has a decent bend ratio. I was able to bend the 7mm MDF (only a 70mm x 70mm piece) in the picture about 30-35 degrees in all directions, crowning the center. It does not create as many square jointed bends that other patterns had been making, so I am fairly happy with the results.
It was inspired by "Kofaktorlab's" Super Flexible Double Curvature Surface at Instructables.