1 / 2
35mm Film Holder - For Holder like Valoi 360 Advancer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
35mm Film Holder - For Holder like Valoi 360 Advancer
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 386
- Wydruki
- 0
- Wyświetlenia
- 2504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (36)Powiązane
I purchased a 360 advancer second hand, and it did not include a 35mm film strip holder so, I drafted one up real quick.
The holder is printed in two halves so that film track is perpendicular to the layers lines, making them as clean as possible. If your printer is setup well enough, these two pieces can be snapped together without glue. The holder is then placed on top of the mask. This also has a pretty good press fit, so you might not need to glue this either.
See pics for print orientation