Very average peg board hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed in tinkercad. You can see roughly how i designed it.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 273
- Wydruki
- 1
- Wyświetlenia
- 1067
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
This is actually a remix
Remixed from these models:
https://www.printables.com/model/315253-pegboard-hook
and
https://www.thingiverse.com/thing:4582239
I found that all the pegboard hooks I printed wouldn't work well in my board, so I designed my own with my favourite pegboard model, ‘Nerf Blaster Pegboard Mount’. I took the Pegboard-interfacing piece on that design, used the hook from 'Pegboard Hook', and combined them. I hope this will fit nicely on your pegboard. Print with whatever layer height, I recommend printing with 100% infill and 3 perimeters. PETG, ABS, PLA, it really doesn't matter. Just make sure it's strong. Consider uploading a make, giving it a review, and liking the model, as it helps me ;). I know you have some almost-empty filament rolls… These are great for those last few meters!
Update 12/2/2023 added cylinder on the bottom pin/peg? for better fit. It no longer falls out every time you remove the tool from the hook. I did not update the photos as the change is internal.