1 / 1
Yakima Bike Rack End for Car Roof Rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement bike rack end designed in Freecad made to replace the factory original. It has been in use for 3 years
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 441
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
For best results print on the flat face. I intentionally designed it so the layers are at an angle to the stresses. The clip would break otherwise.