1 / 1
Bearing based spirographic WDT tool, Remix of Kensei and Kampflafer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified design of Kensei and Kampflafer to better match the original design of the Moonraker.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1753
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (2)Kolekcje (28)Powiązane
I did not provide STLs because I adjusted the tolerances on the original to work with my Bambu printers. I parameterized the needle and bearing dimensions in Fusion so you can tweak them to your machine tolerances and then export the respective part STLs for printing.
- Removed visible screw holes from OG design by Kensei
- Removed adjustable needle from OG design by kensei, instead set a fixed position with 6 possible locations for finer adjustment.
- Added a chamfer to Gear C for smoother turning. The hard edges of the gears would catch on each other.
- Designed a base for Kampflafer's 6x3mm magnetic lower body.