1 / 2
Hek lok - A universal print-in-place clamping belt attachment system (Tek-lok belt clip alternative) — zdjęcie 1
1 / 2

Hek lok - A universal print-in-place clamping belt attachment system (Tek-lok belt clip alternative)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This style belt clip is often used for attaching tools, knives, and other accessories to belts of various sizes.

Ocena
5 / 5
Polubienia
273
Pobrania
1678
Wydruki
15
Wyświetlenia
6916
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

The hek lok requires no hardware to attach to the belt, but can use standard tek-lok hardware or M5 nuts/bolts to attach various items to the clip. 

Print instructions:

PETG is an ideal material for the repeated flex of the clip, though PLA+ also works fine. 

Recommended to use at least 2.8mm of walls (7 perimeters @0.4mm width) so that the clip arms print as continuous lines, though as few as 4 walls may work. 

Paint on supports are required at the two downward facing surfaces of the clip hooks as shown below. Recommended to use smart fill to paint the entire surface. 

If paint on supports aren't available in you slicer of choice, just enable supports and use support blockers for the other half of the model. 

utility belt clip clamp tek lok teck lock tech

Tagi