Pleiades Stars Earrings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very special gift for a very special person
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 174
- Wydruki
- 2
- Wyświetlenia
- 569
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As a gift for my girlfriend, I made these earrings based on Pleiades star cluster.
I printed them at 0.15mm layer height on a 0.4mm nozzle. It needs support under the hook and brims inside and outside to prevent small stars from moving away. The overall print time was 13 minutes for me.
You can find the 3mf file (from PrusaSlicer) with the support and brims already configured.
The hooks I used is this set from Amazon.
EDIT July 2nd
My girlfriend likes these very much but they were a bit too big, so I made a smaller version. I attached both models (50mm and 40mm wide) here. I also printed the smaller model with 2 colors.