Biqu B1 - belt driven Z axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the KevinAkaSam Ender 3 Belt Driven Z Mod.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 1343
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I have managed to install this mod on Biqu B1, but I had to do some adaptations:
1. 1_RightV3.7 - modified the location of the bolt from inside - it was 0.5 mm closer to the extrusion
2. the Bottom part I also modified it so it can be mounted on the extrusios
3. I fixed the Z-endstop switch using the left screw of the clamp mounted on the left plate, right close to the extruder.
4. I fixed the screw used for Z-endstop, using the right screw from the bottom part, but I had to add around 4 washers to be aligned to the switch.
I have used the kit from Aliexpress, and it was a very good fit.