PV-Clamp on Wallprojection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Solution to clamp a PV Panel on a Wallprojection put solid on the Floor. Just like a Wall decoration.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I love the Idea having a Micro PV Power Plant of my own.
Its made for 1035 wide PV Panels with a 30/30mm frame.
For this Mounting solution you need a 12mm threaded rod, 2 washers and 2 M12 Nuts. (red part in the drawing)
For 1035 wide Panels an uncut 1000mm rod is perfect, so no need for cutting tools.
As a precaution, measurements for rod lengh are: The inner PV frame distance (its about 20mm less than the overallsize), subtract 14mm für the rods pothole. (PV is the blue part in the drawing)
Assemble, position and fasten nuts gently.
A rough surface warrants a good grip to the clamp but i cannot assure windresistence numbers and child safety.