Dovetailed Globe or Rock/Mineral Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Having seen cool stands for globes such as:https://www.amazon.com/Diameter-Printed-Yellow-…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 539
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Having seen cool stands for globes such as: https://www.amazon.com/Diameter-Printed-Yellow-Control-6inch-11Inch/dp/B078XRK9GQ
I searched for one on thingverse. I found the originator from momomona was what I wanted, but had difficulty printing it. The pin and tube connectors did not print well at the scale I wanted and required supports. To fix this, I redesigned the model with dovetail sockets. Now I can print 3 copies in 2 hours and they are ready to snap together without post-print rework. No glue or fasteners required. There is enough flex to bend the last connection into place.
They work great for displaying minerals or supporting globes.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker
Rafts:
Yes
Supports:
No
Resolution:
normal
Infill:
10%
Filament: Ultimaker PLA silver
Notes:
Ultimaker Go, blue tape wiped with ethanol
The STL model provided was scaled to 25% to fit on the UMgo printer and then copied 2 times. See pics.Category: Art Tools