1 / 2
Prusa Mini(+) Z-axis dust cover benchi — zdjęcie 1
1 / 2

Prusa Mini(+) Z-axis dust cover benchi

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

purely aesthetic remix of _FirstLayer and the model you can find here https://www.printables.com/fr/model/62451-prusa-m

Ocena
0 / 5
Polubienia
5
Pobrania
59
Wydruki
0
Wyświetlenia
366
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A mix of the dust cover and the famous benchi (in a smaller format). 
I personally printed it with prusa orange PETG in order to stay as much in the prusa spirit as possible. I don't recommend it, as the prusa mini has a lot of trouble producing this type of hesthetic part in PETG, but it comes out very well with PLA (only I don't have any prusa orange PLA). 
I'd recommend adding supports to both PETG and PLA, as the bridges would otherwise be too big.

Translated with www.DeepL.com/Translator (free version)