1 / 1
UPDATED: Studio Monitor Stands / Speaker Stands
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Less material needed. Multiple: tube lenghts, clamp sizes.
- Ocena
- 4,2 / 5
- Polubienia
- 118
- Pobrania
- 619
- Wydruki
- 5
- Wyświetlenia
- 2833
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 5) (Komentarze: 16)Remiksy (0)Kolekcje (167)Powiązane
Update 26.09.2025
Added rotated clamp after @EmilioHerrad request.
Updated
Chose to update my model for cleaner, more functional and less material heavy desing. Added different lenghts of tubes, clamp sizes to accommodate Ikea standards (can add more uppon request). The new design should be esier to edit.
To be fair i didnt have time to print this version but i will but all should fit without issues, since they are based on the v1's.
I have been using v1 of these since 2021 without issues.
Print Settings :
- Filament tested : I used Pet-G but using PLA should help with the wobbling
- layer height: 0.28mm
- Infill: 30-40%
- Perimeters: 3-4
- Supports: Only for Clamps
- Brim: No
I hope u will enjoy it.