Clamp On, Filament guide with 4mm PTFE lining for Prusa mk3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print filament guide for prusa printers, with 4mm PTFE to make the filament ride smooth. Detailed instructions
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 479
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello!! Here I have made a filament guide to stop filament coming off the spool mid print, I was having problems printing the base to my PS5 charging tower due to it being massive and taking 2 rolls of filament to print, when I would pause the print after the first roll the second fresh roll would keep unspooling, see photos to see the issue, so here we have the very reason for 3D printing…. upgrades!!! XD So this filament guide solves this issue at the same time as looking pretty snazzy too, and with a PTFE lining where the filament passes through the guide makes it work really well, very smooth, the only extra parts needed is about 40mm of 4mm PTFE tube, (same size as your spare PTFE the comes with a prusa) so if u own a prusa you own the PTFE. No need for automatic supports as this has its own built in custom support, Easy attachment to any prusa with the easy to print clamp system, don't worry easy to follow instructions too :) Happy Printing, Happy filament guiding!! XD