1 / 7
Magnetic tube holder for PELA2000 Oil Extractor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use magnets to hold your tube in place, to spare a hand for pumping, when using the PELA2000 oil extractor
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Pause the print at layer 17 or 18 (when printing at 0.2mm layer height) to drop in 2 x 12x2mm magnets before resuming printing of the print-in-place model - see images.
Alternatively, print the model with the side slot, to glue magnet in after printing.