1 / 1
Label catcher for Brother PT-750W
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little tower to collect as many labels as you can print.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I have tried a few models that were on here and Thingiverse, and unfortunately, for my uses and printer, they didn't do a good job of collecting a lot of lots of small labels. For example, recently I needed to print 100+ labels for something. Without this, they would have gone everywhere.
This does require supports to print, unfortunately. I had less luck with a 45 degree surface that would print more easily. Organic supports in 2.6.0 work great though without using a ton of material.