Sortimo L-Boxx Mini inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts for the Sortimo L-Boxx Mini. These inserts are intended to be used as two layers in per box.
- Ocena
- 5 / 5
- Polubienia
- 139
- Pobrania
- 603
- Wydruki
- 11
- Wyświetlenia
- 7381
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Inserts for the Sortimo L-Boxx Mini.
These inserts are intended to be used as two layers in per box. The upper inserts fit the lid tightly, ensuring that even small parts don't move when the L-Boxx is turned upside down and shaken. Yes, I tested this. This means that the upper layer has a left/right side while you can simply print the same model for the lower layer.
There's also a spacer upper layer, which ensures no small parts come loose in the lower layer, but allowing larger parts in the upper layer. This is useful for crimping pliers and such.
If you need other segments, let me know. I will add more variants as I need them for myself, as well.
Also see https://github.com/richih/3d_printing
Print instructions
I used PETG. In Prusa Slicer, I selected "0.1 mm DETAIL" but changed the layer height to 0.25 mm in variable layer height. This gave me precise, but sturdy prints.
Also see https://github.com/prusa3d/PrusaSlicer/issues/5607
Ideally use a 0.4 mm nozzle. The walls have a thickness of 1.2 mm, which ensures that all compartments are lined with continuous rings of material and 100% gap fill. This makes the verticals extremely sturdy; sturdier than some thicker walls in my amateur testing.
Do NOT enable surface ironing until https://github.com/prusa3d/PrusaSlicer/issues/5634 is fixed or your verticals might come off and you'll have to use a soldering iron and some spare filament to fix them. See GitHub issue for photos.