T-Rex Tape Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I adapted the skull of Makerbot's T-Rex as a tape dispenser
- Ocena
- 5 / 5
- Polubienia
- 174
- Pobrania
- 180
- Wydruki
- 2
- Wyświetlenia
- 1571
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The skull from Makerbot's T-Rex is scaled 2x with a cutout to hold the tape spool. The dispenser can either be printed as a single model with the base attached, or the dispenser and the based printed separately and glued together. Some minor supports are required and are easy to remove. I have included .3mf project files for both Bambu Studio and Prusa Slicer. The axle is 8mm and the hole in the inner spool is 8.1mm. You may need to adjust x-y hole compensation in the spool so the axle is an easy fit. I printed in PLA, .2mm layer height and 10% infill.