1 / 2
French cleat hook — zdjęcie 1
1 / 2

French cleat hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are french cleat hooks. The first one has two holes for one or two brass threaded inserts for M3 screws.

Ocena
0 / 5
Polubienia
38
Pobrania
104
Wydruki
0
Wyświetlenia
1473
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

These are french cleat hooks.

The first one has two holes for one or two brass threaded inserts for M3 screws. From the side to attach things, or simply as a hook to hang e.g. a Japanese saw, metal ruler, or similar.
The second model allows you to pass a dowel, rod, or similar through it, allowing you to build holders for pliers, etc. Rods with a diameter of 6-8 mm recommended.

The screw from below is to fix the hook in place in case that specific hook should stay in the exact place on your french cleat wall.

I used ruthex inserts from https://amzn.to/35ilBfw as they came out on top in the CNC kitchen test, but all inserts for M3 screws should work.

Please note that these hooks have stress relief holes on top and wobble-protection on the bottom.

Also see https://github.com/richih/3d_printing

Print instructions

I used PETG. In Prusa Slicer, I selected "0.1 mm DETAIL" but changed the layer height to 0.25 in variable layer height. This gave me precise, but sturdy prints.

Also see https://github.com/prusa3d/PrusaSlicer/issues/5607

Print with six perimeters and you won't be able to break them with your bare hands.

Tagi