Mini lathe Carriage indicator holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits the Busy Bee Mini Lathe cross slide. Likely fits others too, but I have no experience there. Step file included…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits the Busy Bee Mini Lathe cross slide. Likely fits others too, but I have no experience there. Step file included if that would be helpful. Added to model is a clearance slot for the gibb nuts, not shown in photos. If you do spin this for your lathe please post a make. There is a spot for a magnet, but I didn't find it necessary as it stayed in place by friction.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
draft works well.
Infill:
any
Notes:
There is a hole for a set screw to hold the indicator shaft, the intention was to tap the print and use a set screw, however the indicator on mine is a tight friction fit.
Comments and suggestions welcome, I'm a complete noob for Fusion 360. When I learned to draft when we used pen to paper.
Category: Machine Tools