ElephCroc Tape Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute tape dispenser for 75mm inner diameter / up to 50mm width tape.
- Ocena
- 4 / 5
- Polubienia
- 55
- Pobrania
- 220
- Wydruki
- 2
- Wyświetlenia
- 1081
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
edit 07/2024: added STEP file for easier remixing.
I designed this cute ElephCroc tape dispenser for a current design contest.
Teeths are swappable - i recommend to print the teeth with stronger material (PETG, ABS, ASA etc.). Contains a lock secured by a pin that holds the tape from falling out.
Basic info:
- Print time: 4 hours 50 minutes
- Filament: Spectrum pastel turquoise and white PLA
- Layer height: 0,3mm, teeth at 0,15mm
- Weight: 100 grams
There is a 3mf file sliced with PSlicer 2.6.0.
If you slicing the model by yourself, i recommend supporting these two surfaces with a snug style support:
After printing, clean remaining leftovers with a knife:
Thank you for downloading and printing this model. If you like it, give me a like.
If you like my designs, you can support me here: https://revolut.me/koutnyjkb