Tripod Wall bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mounted solution for storing tripods and other support gear for photography
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 214
- Wydruki
- 2
- Wyświetlenia
- 1487
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a better storage solution for my tripods and other support gear than piling them in a closet, so I designed these wall mounts to hang them from the ball head.
Large: 25mm throat, 75mm clearance under the plate
Standard: 20mm throat, 60mm clearance under the plate
Monopod: 40x40mm square throat, 60mm clearance under the plate
Double: based on the Standard with the same throat and clearance dimensions
Antislip slots take an M4x10mm machine screw with a matching nut and washer - the nut is recessed into the print on the underside of the mount.
Note: The large mount was designed around a Sirui K40-X ballhead, the Standard is designed for the Sirui K30-X ballhead. Mounts should be fairly universal with any similarly-sized heads
Printed in PETG with 8 perimeters for strength - mounting holes are countersunk for a clean finish.