1 / 3
Gridfinity 2x2 Bosch GAL 12V-20 Battery Charger Holder — zdjęcie 1
1 / 3

Gridfinity 2x2 Bosch GAL 12V-20 Battery Charger Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gridfinity 2x2 Bosch GAL 12V-20 Battery Charger Holder

Ocena
5 / 5
Polubienia
21
Pobrania
117
Wydruki
1
Wyświetlenia
1131
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Gridfinity 2x2 Bosch GAL 12V-20 Battery Charger Holder

Included is the f3d file

I used a 0.2mm layer height with a 0.4mm nozzle.

The two screw holes at the bottom need support. 

Unscrew the bottom part of the charger and replace with this part. 
The same two screws can be used.

Note that there is a cable coming out the back and a small overhang at the front. 

Tagi